AUTHORISED DISTRIBUTOR

Liquidyn Micro Dispensing Valves

The Liquidyn micro dispensing valve range at a glance - click respective image to see further details

P-Dot Micro Dispensing Valve for precision dot dispensing of medium to high viscosity materials P-Dot AN Micro Dispensing Valve for precision dot dispensing of anaerobic adhesives & corrosive materials P-Dot ET Micro Dispensing Valve for precision dot dispensing of high viscosity materials
Micro Dispensing Valves P-Dot
 
Dynamic Dot
Dosing
P-Dot
Dispensing medium to high viscosity materials
P-Dot AN
Dispensing anaerobic adhesives & corrosive materials
P-Dot CT
Dispensing high viscosity materials
 
       
P-Jet Micro Dispensing Valve for precision bead or line dispensing of low to medium viscosity materials P-Jet AN Micro Dispensing Valve for precision bead or line dispensing of anaerobic adhesives and corrosive materials P-Jet CT Micro Dispensing Valve for precision bead or line dispensing of low to medium viscosity materials
Micro Dispensing Valves P-Jet
 
Bead & Line
Dispensing
P-Jet
Dispensing low to medium viscosity materials
P-Jet AN
Dispensing anaerobic adhesives & corrosive materials
P-Jet CT
Dispensing low to medium viscosity materials
 

 

Micro Dispense Dynamic Dot Valves
 

Liquidyn Micro Dispensing Valve P-Dot

Dynamic Dot
Dosing

Non-Contact Micro Dispensing Valve for high speed dot dispensing
Pneumatically operated High-Speed Valve for non contact Micro Dot dispensing of high viscosity materials.

The Liquidyn Micro-Dispensing Valve P-Dot is designed for non-contact dispensing of adhesives, silicones, lacquers, oils & greases. Because of its extreme short triggering time (< 1ms), it can deliver extremely small quantities of high viscosity materials at distances ranging from 2 to 40 mm with pin point precision at a rate of up to 150 micro dots / second.

The amount of fluid that is possible to be dispensed, can be varied between 3 and 200 nano litres per triggering, creating droplets with dispense distance ranging from 2 - 10 mm from the part. Depending on the material viscosity, micro dot sizes from a minimum of 0.3 mm right up to 5 mm in diameter can be dispensed with extremely high repeatability with no splatter or cross contamination - ideal for SMT PCB Manufacture, small parts bonding & lubrication.

Features of the Micro Dispensing Valve P-Dot

  Switching Time ≤ 1 ms
  Driven by 24 V DC Input Signal
  Normally Closed
  Volume Per Shot (3 200 nanolitres)
  High Accuracy - Better than < 1%
  Robust and Suitable for all Industrial Applications
  Easy Operation and Maintenance

 
 Download Product Sheet on Micro Dispensing Valve P-Dot
Micro dispensing of threadlock adhesive

Specifications for Micro Dispensing Valve P-Dot

 Initial position  NC (normally closed)
 Shot size  3 200 nanolitres
 Viscosity range  50 200,000 mPas (thixotropic)
 Accuracy  > 99% (Dispensing Tolerance < 1%)
 Frequency  Up to 150 shot per second (Hz)
 Fluid pressure  0.2 - 6 bar (Max 100 bar)
 Chemical resistance  Acids, alkali, solvents
 Operating medium  Cleaned compressed air, oil-free, filter unit (40 m)
 Operating pressure  2 to 8 bar
 Switching time  < 1 ms
 Electrical input  24 V, PLC compatible
 Service life  > 100 million cycles
 Weight  270 g
 Ambient temperature  -5 to +40 C
 Construction  Robust industrial design, class II equipment IP 65
Closeup view of non-contact dot dispensing of SMT epoxy
Dot dispensing on silver filled epoxy on PCB

Do you have an application for Micro Dispensing - if so, please complete our on-line enquiry form by clicking here

Top of Page


Liquidyn Micro Dispensing Valve P-Dot AN

Dynamic Dot
Dosing

Non-Contact Micro Dispensing Valve for high speed dot dispensing of anaerobic adhesves (super glues)

Pneumatically operated High-Speed Valve for non-contact Micro Dot dispensing of anaerobic adhesives and corrosive materials.

The Liquidyn Micro-Dispensing Valve P-Dot AN is an advanced version of the Valve P-Dot in order to allow high speed dispensing of anaerobic adhesives and corrosive materials.

By using specialist materials in the fluidic area of the valve with a specially designed sealing seat, it is now possible to dispense anaerobic (super glue) adhesives which are primarily used for rapid bonding of metals, magnets & ferrites products together, allowing safe production in industrial processes.

The most popular applications for the P-Dot AN is in the field of fastening of bolts, ball bearings and shafts with anaerobic (super glue) adhesives such as Loctite 648.

Features of the Micro Dispensing Valve P-Dot AN

  Switching Time ≤ 1 ms
  Driven by 24 V DC Input Signal
  Normally Closed
  Volume Per Shot (30 200 nanolitres)
  High Accuracy - Better than < 2%
  Robust and Suitable for all Industrial Applications
  Easy Operation and Maintenance

 
 Download Product Sheet on Micro Dispensing Valve P-Dot

Applying anaerobic glue with high speed dot dispensing valve

Specifications for Micro-dispensing Valve P-Dot AN

 Initial position  NC (normally closed)
 Shot size  30 200 nanolitres
 Viscosity range  50 3,000 mPas (thixotropic)
 Accuracy  < 2%
 Frequency  Up to 150 Hz
 Fluid pressure  Up to 10 bar
 Chemical resistance  Acids, alkali, solvents, super glues
 Operating medium  Cleaned compressed air, oil-free, filter unit (40 m)
 Operating pressure  2 to 8 bar
 Switching time  < 1 ms
 Electrical input  24 V, SPS compatible
 Service life  > 100 Million shots
 Weight  240 g
 Ambient temperature  -5 to +40 C
 Construction  Robust industrial design, class II equipment IP 65
Applying anaerobic glue with high speed dot dispensing valve


Do you have an application for Micro Dispensing - if so, please complete our on-line enquiry form by clicking here

Top of Page


Liquidyn Micro Dispensing Valve P-Dot CT

Dynamic Dot
Dosing

Non-Contact Micro Dispensing Valve for high speed dot dispensing
Pneumatically operated High-Speed Valve for non contact Micro Dot dispensing of high viscosity materials.

The Liquidyn Micro-Dispensing Valve P-Dot CT is designed for non-contact dispensing of adhesives, silicones, lacquers, oils & greases. Because of its extreme short triggering time (< 1ms), it can deliver extremely small quantities of high viscosity materials at distances ranging from 2 to 10 mm with pin point precision at a rate of up to 150 micro dots / second.

The amount of fluid that is possible to be dispensed, can be varied between 3 and 200 nano litres per triggering, creating droplets with dispense distance ranging from 2 - 10 mm from the part. Depending on the material viscosity, micro dot sizes from a minimum of 350m right up to 2000m in diameter can be dispensed with extremely high repeatability with no splatter or cross contamination - ideal for SMT PCB Manufacture, small parts bonding & lubrication.

Features of the Micro Dispensing Valve P-Dot

  Switching Time ≤ 1 ms
  50 200,000 mPas (thixotropic)
  Driven by 24 V DC Input Signal
  Normally Closed
  Volume Per Shot (3 200 nanolitres)
  High Accuracy - Better than < 1%
  Robust and Suitable for all Industrial Applications
  Easy Operation and Maintenance

 
 Download Product Sheet on Micro Dispensing Valve P-Dot CT
High speed dot dispensing of SMT adhesive

Specifications for Micro Dispensing Valve P-Dot
CT
 Initial position  NC (normally closed)
 Shot size  3 200 nanolitres
 Viscosity range  50 200,000 mPas (thixotropic)
 Accuracy  > 99% (Dispensing Tolerance < 1%)
 Frequency  Up to 150 shot per second (Hz)
 Fluid pressure  0.2 - 6 bar (Max 100 bar)
 Chemical resistance  Acids, alkali, solvents
 Operating medium  Cleaned compressed air, oil-free, filter unit (40 m)
 Operating pressure  2 to 5 bar
 Switching time  < 1 ms
 Electrical input  24 V, PLC compatible
 Service life  > 100 million cycles
 Weight  270 g
 Ambient temperature  -5 to +40 C
 Construction  Robust industrial design, class II equipment IP 65
Closeup view of non-contact dot dispensing of SMT epoxy
Dot dispensing on silver filled epoxy on PCB

Do you have an application for Micro Dispensing - if so, please complete our on-line enquiry form by clicking here

Top of Page


 

 Micro Dispense Jetting Valves

 

Liquidyn Micro Dispensing Valve P-Jet

Bead & Line
Dispensing

Non-Contact Micro Dispensing Valve for high speed jet dispensing

Pneumatically operated High-speed Valve for JET dispensing of fluids with medium to low viscosities.

The Liquidyn Micro-Dispensing Valve P-Jet is designed for non-contact application of lacquers, soldering flux, oils and greases.

The triggering time can be varied in millisecond increments, enabling the dispensing volume of a single shot to be adjusted from 50 nanolitres up to millilitres.

With this capability, depending on the material, dispensing of single dots, beads and large volumes can be achieved. Due to the zero cavity nozzle design, it is possible to reproduce the set dispense volume with extremely high accuracy.

Features of the Micro Dispensing Valve P-Jet

  Switching Time from 2 ms
  Driven by 24 V DC Input Signal
  Normally Closed
  Volume Per Shot (from 10 nanolitres to several ml)
  High Accuracy - Better than < 3%
  Robust and Suitable for all Industrial Applications
  Easy Operation and Maintenance

 
 Download Product Sheet on Micro Dispensing Valve P-Jet
 

Jet dispensing of silicone encapsulation on circuit board


Specifications for Micro-dispensing Valve P-Jet

 Initial position  NC (normally closed)
 Shot size  From 50 nanolitres up to ml
 Viscosity range  0.5 10,000 mPas (thixotropic)
 Accuracy  < 3%
 Frequency  Up to 150 Hz
 Fluid pressure  Up to 50 bar
 Chemical resistance  Acids, Alkali, Solvents
 Operating medium  Clean compressed air, oil-free, filter unit (40 m)
 Operating pressure  2 to 8 bar
 Switching time  min ≥ 2ms
 Electrical input  24 V, SPS compatible
 Service life  > 100 Million shots
 Weight  270 g
 Ambient temperature  -5 to +40 C
 Construction  Robust industrial design, class II equipment IP 65
Closeup of jet dispensing



Precision Jet Dispensing of lubricant

Do you have an application for Micro Dispensing - if so, please complete our on-line enquiry form by clicking here

Top of Page


Liquidyn Micro Dispensing Valve P-Jet AN

Bead & Line
Dispensing

Non-Contact Micro Dispensing Valve for high speed jet dispensing of anaerobic adhesive (super glue)

Pneumatically operated High-speed Valve for JET dispensing of anaerobic adhesives.

The Liquidyn Micro-Dispensing Valve P-Jet AN is an advanced version of the Valve P-Jet in order to allow high speed dispensing of anaerobic adhesives.

By using specialist materials in the fluidic area of the valve with a specially designed sealing seat, it is now possible to dispense anaerobic (super glue) adhesives which are primarily used for rapid bonding of metals, magnets & ferrite products together, allowing safe production in industrial processes.

The most popular applications for the P-Jet AN is in the field of fastening of bolts, ball bearings and shafts with anaerobic (super glue) adhesives such as Loctite 648.

Features of the Micro Dispensing Valve P-Jet AN

  Switching Time 2 ms
  Driven by 24 V DC Input Signal
  Normally Closed
  Volume Per Shot from 50 nanolitres
  High Accuracy - Better than < 3%
  Robust and Suitable for all Industrial Applications
  Easy Operation and Maintenance

 
 Download Product Sheet on Micro Dispensing Valve P-Jet
Thread locking with anaerobic adhesives applied with high speed jet dispense valve

Specifications for Micro-dispensing Valve P-Jet AN

 Initial position  NC (normally closed)
 Shot size  From 30 nanolitres
 Viscosity range  50 3,000 mPas (thixotropic)
 Accuracy  >97% (dispensing tolerance < 3 %)
 Frequency  Up to 50 shots/sec (50 Hz)
 Fluid pressure  Up to 10 bar
 Chemical resistance  Acids, alkali, solvents, super glues
 Operating medium  Cleaned compressed air, oil-free, filter unit (40 m)
 Operating pressure  5 to 8 bar
 Switching time  ≥ 2 ms to ∞
 Electrical input  24 V, SPS compatible
 Service life  > 100 Million cycles
 Weight  240 g
 Ambient temperature  -5 to +40 C
 Construction  Robust industrial design, class II equipment IP 65
Jetting Anaerobic adhesives with high speed jet dispense valve

 

 

 

 

 

 

 

 

Do you have an application for Micro Dispensing - if so, please complete our on-line enquiry form by clicking here

Top of Page


Liquidyn Micro Dispensing Valve P-Jet CT

Bead & Line
Dispensing

Non-Contact Micro Dispensing Valve for high speed jet dispensing

High precision micro dispensing valve for stable, accurate fast and flexible dispensing.

Pneumatically operated High-speed Valve for JET dispensing of low to medium viscosity fluids including highly abrasive mediums from 3nl shots.

The Liquidyn Micro-Dispensing Valve P-Jet is designed for non-contact application of oils, greases, adhesives, paints, fluxes, medical products and many other chemicals.

Dispensing frequencies of up to 280Hz allow for a faster production process. The fluid carrying components are quick and easy to exchange.  The valve is extremely reliable due to the separation of the actuator and the fluid carrying components, preventing migration of aggressive chemicals into the pneumatic drive module. 

With this capability, depending on the material, dispensing of single dots, beads and large volumes can be achieved. Due to the zero cavity nozzle design, it is possible to reproduce the set dispense volume with extremely high accuracy.

Ideal for Electronic, Solar, Automotive, Packaging, Furniture, Medical, Cosmetic, Food and Special Machinery applications

Features of the Micro Dispensing Valve P-Jet CT

  Easily Interchangeable Nozzles & Dispensing Tappets
  Easy Clean Design
  Material Separated from Electro-Pneumatic Actuator
  Volume Per Shot (from 2 nanolitres to several ml)
  Resistant to Chemicals (Acids & Alkalis etc...)
  Robust and Suitable for all Industrial Applications
  Easy Operation and Maintenance

 
 Download Product Sheet on Micro Dispensing Valve P-Jet CT
Accurate repeatable Jet dispensing

Specifications for Micro-dispensing Valve P-Jet

 Initial position  NC (normally closed)
 Shot size  From 5 nanolitres up to ml
 Viscosity range  0.5 10,000 mPas (thixotropic)
 Accuracy  > 97% (Dispensing Tolerance < 3%)
 Frequency  Up to 280 Hz (shots/second)
 Fluid pressure  0.2 - 6 bar (maximum 100 bar)
 Chemical resistance  Acids, Alkali, Solvents
 Operating medium  Clean compressed air, oil-free, filter unit (40 m)
 Operating pressure  4 to 8 bar
 Switching time  from 2ms
 Electrical input  24 V, PLC compatible
 Service life  > 100 Million shots
 Weight  270 g
 Ambient temperature  -5 to +40 C
 Construction  Robust industrial design, class II equipment IP 65
Closeup of jet dispensing

 

Do you have an application for Micro Dispensing - if so, please complete our on-line enquiry form by clicking here

Top of Page