FMI Pump Accessories
In addition to our products line, FMI offers a selection of accessories listed below . For additional questions on available accessories or to order, please Contact Us
  • Q485 DIAL INDICATOR KIT ~ For Ultra Fine Adjustment of "Q" pump flow rate setting
  • TUBING ADAPTERS ~ For plastic case pump heads
  • Q661 SMALL BORE TUBING KIT ~ -28 fittings and 1/16, 1/8 OD designed for all FMI low flow tubing connections
  • RH/Q ~ Adds versatility to your "RH" head by adapting it to any "Q" pump drive
  • R479 ~ Low flow isolation kit for stainless steel pump heads (except San)

 

Q485 Dial Indicator Kit (for ultra fine adjustment)

Q485 2 DIAL INDICATOR KIT for fine adjustment of Q pump flow rate settings. A convenient dial indicator with direct reading count hands for precise flow rate setting. Responds to slightest turn of the Q pump adjustment knob. One revolution of primary pointer equals 10% of maximum flow rate (each increment on dial represents 1/1000 of maximum flow rate.) Secondary dial indicates each 10%. Easily attaches to all Q pump bases. Can be ordered with pump or separately.


KIT # Q485


 

 

Top of Page

Tubing Adapters for Plastic Case Pump Heads

The integrally moulded port fittings on the standard FMI Type K pump heads accept all 1/4 OD tubing. For other tubing arrangements, special port adapters are required - Here are a selection of adaptors available to suit FMI Pumps.

#R412-0K Adaptor for 1/8 ID Tubes
#R412-1K Adaptor for 1/4 ID Tubes
#R412-2K Adaptor for 3/8 ID Tubes
#R412-5K Adaptor for 1/4-28 ferrule fittings
#R412-6K Adaptor for 1/2" ID Tubes
#H476-K Adaptor for 1/8 OD Tubes
#110949 Adaptor for 6mm OD Tubes

Q661 Small Bore Tubing Kit
1/4-28 Fittings and 1/16, 1/8 OD PTFE Tubing

Designed for all LF Pump Heads and to complement the FMI R479, R412-5K, and PD-60-LF, the Small Bore Tubing Kit has a flangeless design that eliminates the need for special tools and assures leak-free, zero dead volume connections. They provide Tefzel and PTFE wetted surfaces.

Kit Q661 - 1/16 & 1/8
Contains both Q661A and Q661B
Kit Q661A - 1/16
10 - 1/16O.D. x 1/32 ID TFE Tubing
10 - Delrin Nuts (Black)
10 - Tefzel Ferrules (Blue)
   
Kit Q661B - 1/8
10 - 1/8O.D. x 1/16 ID TFE Tubing
10 - Delrin Nuts (Green)
10 - Tefzel Ferrules (Yellow)
Kit Q661C - 1/8
10 - 1/8O.D. x 1/16 ID TFE Tubing
10 - PTFE Nuts (White)
10 - Tefzel Ferrules (Yellow)
 

 

Top of Page

RH/Q

Adds Versatility to your RH head by adapting it to any Q pump drive

This is a complete adaptation system that permits use of an RH miniature pump head on any Q drive module. Once the RH pump head is fitted (3 screws) to the kit parts, it can be slipped into place on the drive module in seconds without tools. To remove it, simply loosen the two thumb nuts of the motor base and slip it off.

KIT # RH/Q

R479 Low Flow Isolation Kit
For Stainless Steel Pump Heads (Except SAN)


Kit #R479 is a PTFE adapter for FMI Stainless Steel (S) pump heads that are used in low flow (below 50 ml/min) applications where minimum system dead volume and maximum chemical inertness is required.

The kit provides 1/4-28 internal machine threads that are used with low flow tube fittings for small bore tubing of 1/8 OD or less, such as Kits Q661. Particularly useful in chromatography applications and when using Pulse Dampener PD-60-LF (shown below).

KIT # R479 consisting of four ferrules, two adapters & assembly / removal tools

KIT # R478A Consists of ten spare ferrules

 

 

P56C Adapter Kit

Use the FMI P56C Adapter Kit for easy hook-up to your NEMA 56C Face Foot Mount motor. Specify P56C
Shipping Weight: 4 lb (1.80 kg)

KIT # P56C

 

 

 

Top of Page

Low Flow Barb Adapters
For 1/16 Tubing


Threaded 1/4-28 UNF Fitting to Kynar Barb Bottom sealing, rotating adapters consisting of a white nylon 1/4-28 fitting with 5/16" hex nut and Kynar (fluid path) insert barb.

Part # 110874A Pkg. of 10

Low Flow Barb Adapters
For 1/8 Tubing


Threaded 1/4-28 UNF Fitting to Kynar Barb Bottom sealing, rotating adapters consisting of a white nylon 1/4-28 fitting with 5/16" hex nut and Kynar (fluid path) insert barb.

Part # 110873A Pkg. of 10

FMI Pulse Dampener PD-60-LF
Low Flow Steady Flow Accessory

The FMI Pulse Dampener PD-60-LF is designed to effectively suppress approximately 90% of the pulse magnitude generated by piston type metering pumps operating at flow rates up to 50 ml/min and stroke rates up to 150 per minute against head pressures of 10 to 65 psig. It features low internal volume, isolated pressure gauge, corrosion resistant wetted parts of type 316 stainless steel and TFE, flow-through (self-purging) design, excellent reduction of base line drift and noise in feeding low-pressure liquid chromatography systems, all in a small (2.7 x 5 x 6 high), lightweight (1.6 lbs net) package arranged to accept standard 1/4-28 tubing accessories.

Model PD-60-LF

PH-HF In-Line Pulse Suppressor
For High Flow Applications

NEW IN-LINE PULSE SUPPRESSOR for high flow systems of 50 ml/min or greater and stroke rates higher than 150 spm against head pressures of 10 to 65 psig. Unique encapsulated polyethylene bellows design that eliminates tubing vibrations and cavitation problems. Easy to connect 1/4 compression fittings. Best results achieved when installed on both suction and discharge

Model PD-HF

 

 

Top of Page

Corrugated PTFE Tubing Pulse Suppressor
For High Flow Applications

Highly flexible no kink tubing for high flow, 50 ml/min or greater, high pressure (100 psig) applications. Eliminates cavitation and mechanical stress. Best results when used on both suction and discharge lines. Slips over 3/8 barbed fitting.

3/8 I.D. x 12 long

Part # 58003